Approx. Rs 150 / PieceGet Latest Price
Manufacturers of Positive drive pulley (Timing pulley) manufactured from quality materials, like Ferrous and Non-ferrous (Steel and Aluminum Alloys Material as BSW-4548-1970; DIN 7721) OR as per different Standards OR as per customer''s drawing.
Two important concepts in gearing are pitch surface and pitch angle. The pitch surface of a gear is the imaginary toothless surface that you would have by averaging out the peaks and valleys of the individual teeth. The pitch surface of an ordinary gear is the shape of a cylinder. The pitch angle of a gear is the angle between the face of the pitch surface and the axis.
The most familiar kinds of bevel gears have pitch angles of less than 90 degrees and therefore are cone-shaped. This type of bevel gear is called external because the gear teeth point outward. The pitch surfaces of meshed external bevel gears are coaxial with the gear shafts; the apexes of the two surfaces are at the point of intersection of the shaft.
Approx. Rs 300 / PieceGet Latest Price
TIMING PULLY 5mm PitchThe drive pulleys 5mm The increased use of spline connections with involute tooth flanks has brought us to purchase a wide variety of hobbing and tools and this is in accordance with the various standardization systems.
These connections can be “sliding” or “fixed”, and with “centering” on the tooth flanks or on the external diameter of the axle (tooth tip) or on the inner diameter.
The involute spline connections are similar to the classic teeth for gears, with a pressure angle of 20° or 30° depending on the standard used. The intention which is the basis of this idea is: external spline connections manufactured in the same way (same machines and similar tools), as for the classic gears, by hobbing (hobbing and cutting tools). The corresponding internal spline connections manufactured by the gear generating proces at tooth hobbing machines (Fellows &-Lorenz) or by broaching machines (for larger series).
Certain systems are even equipped to use the same milling tools as for normal teeth.
The most common pressure angles are 20° (with adjusted positive addendum modification to obtain an effective pressure angle of ± 30 °in the area of the pitch circle; i.e. NBN 270 or PN-E 22-141) and 30° (DIN 5480, 5482 and AISI-B92-1-1970).
Recently the Americans added to the standard used pressure angle 30°, the standardization of the pressure angles 37°30′ and 45°. For choosing the tooth numbers, the module, the type of centering and fitting, we are referring to the tables published by the various standardization organizations.
Additional Information:
Approx. Rs 300 / PieceGet Latest Price
Available with us is a precisely engineered Ball Screws that are extensively used in various industries such as engineering and automobile. Efficient in converting of rotational motion to linear, these products are designed to meet the variegated demands of the customers. Owing to their excellent performance, longer functional life and superior quality, these products are highly demanded by the customers.
Further, these screws boasts following components:
Approx. Rs 650 / PieceGet Latest Price
Product Details:Minimum Order Quantity | 1 Piece |
Type | Automotive Pulleys |
About the 8mm Pitch HTD Timing Pulley
The PowerGrip GT2 Belt Drive System is an advance in product design over the Gates‘ older, standard HTD system, providing higher torque carrying capability and improved load carrying strength.
The PowerGrip GT3 Belt Drive System is the newest design and offers additional benefits over GT2. The improved construction and material compound provides superior load bearing capacity. The GT2 Belts are being phased out and replaced by the new GT3 Belt Drive System
Both the PowerGrip GT2 and GT3 System‘s deep tooth design increases the contact area which provides improved resistance to ratcheting. The modified curvilinear teeth enter and exit the pulley grooves cleanly, resulting in reduced vibration.
These belts and pulleys are available in 2 mm, 3 mm & 5 mm pitches and provide the following advantages:
Longer belt life
Precision registration
Increased load-carrying capacity
Quieter operation
Precise positioning
Application Examples for the PowerGrip GT2 and GT3 drive systems: Machine Tools, Hand Power Tools, 3D-Printers, Medical Diagnostic Equipment, Automated Teller Machines, Robotics Equipment, and Vending Equipment.
The efficiency and integrity of a belt drive is closely attributed to the quality of pulleys involved. The pulleys therefore, should be supplied by qualified and licensed suppliers. Stock Drive Products is licensed by Gates. The GT2/GT3 pulleys manufactured by Stock Drive Products are made using licensed hobs, achieving the precise fit for the drive system. The pulleys offered here will mesh perfectly with either the GT2 or GT3 belt.
Explore More Products
© Associated Bearing Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited